Notice SONY RM-V302T

Notice SONY RM-V302T

Mode d'emploi SONY RM-V302T disponible.

Groupe d'entraide des utilisateurs SONY RM-V302T
12 membres dans ce groupe pour vous aider
Trouver de l'aide en rejoignant le Groupe d'entraide des
utilisateurs de votre produit RM-V302T

Bienvenue dans le groupe d'entraide des utilisateurs
SONY RM-V302T

Besoin d'aide pour l'utilisation de votre SONY RM-V302T ? Le groupe d'entraide SONY RM-V302T vous donne des conseils d'utilisation, solutions aux problèmes d’entretien, fonctionnement et assistance pour votre Télécommande. Rejoignez notre groupe d'entraide RM-V302T qui compte 12 membre(s). L'inscription GRATUITE vous donne accès à différents services pour votre Télécommande : accès à la notice RM-V302T et mode d'emploi pdf SONY RM-V302T, manuel d'utilisation en français, 5 avis consommateur et 1 discussion(s) de forum actif comprenant 1 participant(s), guide de l'utilisateur, photos, vidéos et SAV entre consommateurs.

SONY RM-V302T

Dernières actualités du groupe d'entraide SONY RM-V302T

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • JulieDA Silva Braconnier  depuis le 17/10/2014 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • aline71  depuis le 05/11/2013 - Expertise débutant - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 127 K | Français
Questions/Réponses, FAQ, Support | Français

« f the component that you want to set up. Note On the VCR, SAT, AMP, and DVD buttons, “VCR,” “satellite tuner,” “amplifier,” and “DVD player” are assigned respectively at the factory. But you can also assign other components on these buttons. For details, see “Changing the Component Type on the VCR, SAT, AMP, and DVD buttons.” 4Enter the component’s code number. For example, if you are entering the code for a Philips TV, you would press -86. 5Press and release the t button to store the code number in the Commander’s memory. 6Go to “Step 2: Checking if the Code Number Works” to finish setting up. If you press a wrong button in step 4 Press the 1 button while pressing the S (SET) button and then go back to step 2. Changing the Factory Setting for the Volume Control 1While pressing the S (SET) button, press the 1 button. 2Press the AMP button. 3Press the 2+ button. 4Press the t button. The volume control setting is changed to “amplifier.” You can control the volume of the amplifier of the AMP button while selecting any component. Notes •If you are using more than one amplifier and have set it on the VCR, SAT or DVD button, when selecting these buttons you cannot control the volume of the amplifier of the AMP button. •If you change the setting of the AMP button to a component other than a receiver or amplifier, the volume control setting of video components will return to “TV” even if you have changed the factory preset volume control. In this case, you will not be able to control the volume from audio components other than a receiver or amplifier. To reset to factory preset volume control In step 3 above, press 2– instead. Operating a Component 1Press the button of the desired component on the Commander. 2Point the Commander directly at the component. 3Press the button for the function you want to use. See “Remote Button Descriptions” for complete descriptions of the buttons on the Commander. Notes on Using the Remote Commander Basically, use this Commander in the same way as the Commanders supplied with your components. •Using this Commander will not increase the functions of your components. The functions of the Commander are limited to the functions of the components themselves. For example, if your TV does not have a MUTING function, the % button on this Commander will not function with your TV. •Some functions of the component may not work with this Commander. Setting a channel with a single button (Channel Macro function) You can program the Channel Macro function on any of the buttons listed below (macro keys). For example, instead of pressing 1, 2, and then ENT button to change the TV channel, you can perform these operations by pressing only the N button. The macro keys are: N, m, M, x, X, and zREC. (During “TV“ or “satellite tuner“ operations only.) The series of operations that can be programmed must consist of two to four sequential pressings of the - to 9 buttons or ENT button. Note The Channel Macro function may not work correctly for some components. Setting Up the Remote Commander About Presetting the Commander The Commander is preset at the factory to operate Sony brand components. If you are using the Commander with a Sony component, you will not need to preset the Commander before you start using it. To set up the Commander to use with other (non-Sony) manufacturers’ components, or to use with a component that is not preset at the factory, y... »

Activité de ce groupe d'entraide

Note moyenne du groupe
4 étoiles
Durée moyenne d’utilisation
7 ans 2 mois
Avis consommateur
5 avis
Aucune opinion sur SONY
Donner votre opinion sur SONY
En cours...