Notice LENCO CR-400

« so 1.Press POWER till the Power LED turns off. 2.To activate the Alarm, press & hold UP for about 2 seconds till the `AL` icon turns on. The `` icon & Alarm Time appears for 2 seconds. 3.To deactivate the Alarm set, press & hold DOWN for about 2 seconds till the `AL` icon turns off. Activate / Deactivate Alarm Setting Clock Time Setting Alarm Time 1.Press POWER till the POWER LED turns off. 2.Press & hold TIME SET for about 2 seconds. The `HOUR` digits will flash. Press UP / DOWN to set the hour. Press TIME SET to confirm the hour set. After this, the `MINUTE` digits will flash. Press UP / DOWN to set the minute. Press TIME SET to confirm the minute set.Then the `WEEKDAY` Indicator will flash. Press UP / DOWN to select the desired weekday (MON to SUN), press TIME SET to confirm the weekday set. 3.At any stage, if no key is pressed within the next 7 seconds (time out period), the last selected value is automatically saved. 1.Press POWER till the POWER LED turns off. 2.Press & hold AL SET for about 2 seconds till the Alarm On icon `` turns on. The `HOUR`digits will flash. Press UP / DOWN to set the hour. Press AL SET to confirm the hour set. After this, the `MINUTE` digits will flash. Press UP / DOWN to set the minute. Press AL SET to confirm the minute set. The `` icon disappears. The Clock Time is displayed. 3.At any stage, if no key is pressed within the next 7 seconds (time out period), the last selected value is automatically saved. 4.Short press UP or DOWN displays the `` icon & Alarm Time for 2 seconds. Playback mp3 Music from your USB Drive / iPod shuffle 1.Make sure that your USB Drive/iPod shuffle contains music in mp3 format. 2.User MUST use the AC adaptor when playing iPod shuffle, otherwise the battery power will be drained away by the iPod. Always power off before inserting/removing the USB to/from the USB Port. 3.Insert the USB Drive and press POWER till the POWER LED turns on. 4.The LCD displays “rEAd”, then the first track “0001” is played automatically. On some MP3 Player you may need to press VII to start playing. 5.Use the Buttons on this unit to control the playback. Short press Icc or vvI to jump to the previous/next track. Long press Icc or vvI to fast scroll backward/forward to other tracks. Press VII to play/pause. 6.Press + / – to turn the volume up/down, “L: 0 to L:15” is displayed. Note : The Alarm Function will only work if the unit is in Power-Off (i.e. POWER LED turns off ; USB or AUX IN is not playing). 1.When the alarm time is reached, the `` icon flashes. 2.If USB Drive is docked, the first mp3 track “0001” is played automatically at factory-set volume level. 3.If USB Drive is not docked or battery power is too low to play the USB drive, then buzzer will sound instead. 1.Press SNOOZE/LIGHT to silent the USB/Buzzer temporarily for approx. 9 minutes. The Snooze function is repeatable in the next 120 minutes. 2.Press POWER or AL SET to cancel Snooze and reset the Alarm. The `` icon disappears. The alarm will sound again tomorrow at the same time. 3.The USB/Buzzer alarm will be reset automatically if no key is pressed in the next 120 minutes. Snooze / Reset Alarm Listening to AUX IN 1.Press POWER till the POWER LED turns on. Plug one end of the Line Cord into the AUX IN Socket of this unit and the other into the Headphone Jack of the iPod, Mp3 Player, Discman or other music source. 2.Use the controls located on the external device... »