Notice MAYTAG G32026

« e if instructions are not understood or if they are beyond personal skill level. 12.Alwaysdisconnect refrigerator from electrical supply before attempting any service. Disconnect power cord by grasping the plug, not the cord. 13.Install refrigerator according to Installation Instructions. All connections for water, electrical power and earthing must comply with local codes and be made by licensed personnel when required. 14.Keep your refrigerator in good condition. Bumping or dropping refrigerator can damage refrigerator or cause refrigerator to malfunction or leak. If damage occurs, have refrigerator checked by qualified service technician. 15.A qualified service technician must replace worn power cords and/or loose plugs. 16.Alwaysread and follow manufacturer’s storage and ideal environment instructions for items being stored in refrigerator. 17.Your refrigerator should notbe operated in the presence of explosive fumes. 18.Children should notclimb, hang or stand on any part of the refrigerator. 19.Clean up spills or water leakage associated with water installation. 20. The appliance is not intended for use by young children or infirm persons without supervision. 21.Young children should be supervised to ensure that they do not play with the appliance. WARNING SAVE THESE INSTRUCTIONS FORFUTUREREFERENCE Installing Your Refrigerator These instructions were provided to aid you in the installation of your unit. The manufacturer cannot be responsible for improper installation. Steps to Follow... Aqualified engineer must connect refrigerator in accordance with these installation instructions. Measure door opening and depth and width of refrigerator. Remove handles or doors if required. Engineer must also do the following: 1. Follow local water and electrical company connection regulations. 2. Complete water supply connection before electrical supply connections. Service to or replacement of power cord must be performed by a qualified engineer. Note: When writing or calling about a service problem, please include the following information: a. Your name, address and telephone number;d. Aclear description of the problem you are having; b. Model number and serial number;e. Proof of purchase (sales receipt) c. Name and address of your dealer or engineer;3 Installation Your refrigerator was packed carefully for shipment. Remove and discard shelf packaging and tape. Do not remove the serial plate. Measuring the Opening When installing your refrigerator, measure carefully. 1.3 cm (1/2”) of air space should be provided for the top and back of the refrigerator. Subflooring or floor coverings (i.e. carpet, tile, wood floors, rugs) may make your opening smaller than anticipated. Some clearance may be gained by using the leveling procedure under Leveling. Important:If refrigerator is to be installed into a recess where the top of the refrigerator is completely covered, use dimensions from floor to top of hinge cap to verify proper clearance. Transporting Your Refrigerator •NEVERtransport refrigerator on its side. If an upright position is not possible, lay refrigerator on its back. Allow refrigerator to sit upright for approximately 30minutesbeforeplugging it in to assure oil returns to the compressor. Plugging the refrigerator in immediately may cause damage to internal parts. •Use an appliance dolly when moving refrigerator. ALWAYStruck refrigerator from its side or back–NEVER... »