Notice KENWOOD IC600

« rds are a hazard, keep them out of the way to prevent accidents. ?Never iron clothes being worn. ?Never put the steam station, cord or plug in liquid – you could get an electric shock. ?Always remove the water tank from the steam station when filling from a tap. ?Don’t let the power and steam supply cords touch hot parts. ?Don’t let infirm people use the steam station without supervision. ?During ironing pauses and after use always place the iron flat on the iron rest of the steam station. ?Never leave the steam station on unattended. ?Never use a damaged steam station. Get it checked or repaired: see ‘service and customer care’. ?Do not use the steam station if it has been dropped, or if there are any visible signs of danger or it is leaking. ?Only use this appliance for its intended domestic use. ?Don’t let children play with the steam station. ?Don’t touch the appliance with wet or damp hands. ?Always unplug the steam station when not in use and allow to cool before moving or cleaning. ?It is extremely dangerous to direct the steam towards people or animals. ?Only use water with this appliance. ?During use, the steam station must be stable and used in a horizontal position. ?Never attempt to attach any unauthorised accessories to the steam station. The outlet should only be used with the Kenwood Multicare accessory kit. ?Never let the iron touch or rest against the water tank. before plugging in Make sure your electricity supply is the same as the one shown on the underside of the steam station. ?This iron complies with European Economic Community Directive 89/336/EEC. before using for the first time 1Remove all packaging and any stickers or labels. 2Wind excess cord around the base of the steam station. 3Test the iron on an old cloth to make sure the soleplate and water tank are clean. We recommend that you allow steam to disperse by pressing the steam button in order to release any residues that may have built up during the manufacturing process. ?Repeat step 3 after prolonged periods of storage. 2
know your Kenwood steam station lock for continuous steam steam button temperature control with indicator light soleplate water tank cover water tank water tank guard rail iron rest cord cactus locations power supply cord cord storage
steam supply cord boiler cap variable steam control low water indicator light on/off button ready to steam indicator light outlet for Multicare accessory kit* carry handle cord cactus *The Multicare accessory kit model ICK01 is not included in pack but can be purchased separately by contacting the shop where you purchased the steam station. using your steam station 1Place the steam station on the support of the ironing board or any other stable surface nearby with the iron sitting on the iron rest. Make sure the steam station is unplugged and that the power and steam supply cords are unrolled and not kinked. 2Fit the cord cactus into one of the cord cactus locations. Place the steam supply cord into one of the grooves on the other end of the cord cactus. This will keep the cord in an upright position. filling with water Either 1Lift off the water tank cover and fill with water. Replace the cover. Or 2Remove the tank by lifting off. Lift off the cover, then fill the tank under the tap. Re-fit the cover. Replace the tank into its original position by gently pushing... »