Notice MAKITA 4073D

« ttery 7002.................................High: Approx.15min. Low: Approx.30min. Overall length ......................................................383mm Net weight ..............................................................1.1kg Output ..............................................................D.C.7.2V •Due to the continuing program of research and devel- opment, the specifications herein are subject to change without prior notice. •Note: Specifications may differ from country to country. Intended use The tool is intended for collecting dry dust. Safety hints For your own safety, please refer to enclosed safety instructions. IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE ENC004-1 1.Before using battery cartridge, read all instruc- tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2.Do not disassemble battery cartridge. 3.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5.Always cover the battery terminals with the bat- tery cover when the battery cartridge is not used. 6.Do not short the battery cartridge: (1)Do not touch the terminals with any conduc- tive material. (2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3)Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a break- down. 7.Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). 8.Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 9.Be careful not to drop or strike battery. SAVE THESE INSTRUCTIONS. Tips for maintaining maximum battery life 1.Charge the battery cartridge before completely discharged. Always stop tool operation and charge the bat- tery cartridge when you notice less tool power. 2.Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3.Charge the battery cartridge with room tempera- ture at 10°C–40°C (50°F–104°F). Let a hot bat- tery cartridge cool down before charging it. 4.Charge the Nickel Metal Hydride battery car- tridge when you do not use it for more than six months. ADDITIONAL SAFETY RULES FOR CLEANER 1.Do not pick up wet materials, lit cigarettes or the like. 2.Stop operation immediately if you notice any- thing abnormal. 3.If you drop or strike the cleaner, check it care- fully for cracks or damage before operation. 4.Do not charge the cleaner close to dangerous flammable materials such as gasoline, gas, paint or adhesives. 5.Do not charge the cleaner on papers, cloth, car- pet, vinyl, etc. This may cause a fire. 6.Do not charge the cleaner in a dusty place. 7.Be sure no one is below when using the cleaner in high locations. 8.Do not bring close to stoves or other heat sources. 9.Do not block the intake hole or vent holes. SAVE THESE INSTRUCTIONS. 5 OPERATING INSTRUCTIONS Installing or removing battery cartridge (Fig.1&2) •Always switch off the tool before insertion or removal of the battery cart... »