Notice PHILIPS FC 8422/01 City Line Sevilla

Notice PHILIPS FC 8422/01 City Line Sevilla

Mode d'emploi PHILIPS FC 8422/01 City Line Sevilla disponible.

Groupe d'entraide des utilisateurs PHILIPS FC 8422/01 City Line Sevilla
32 membres dans ce groupe pour vous aider
Trouver de l'aide en rejoignant le Groupe d'entraide des
utilisateurs de votre produit FC 8422/01 City Line Sevilla

Bienvenue dans le groupe d'entraide des utilisateurs
PHILIPS FC 8422/01 City Line Sevilla

Type d'aspirateur : Traineau, Puissance nominale : 1500 Watts, Filtre hygiène : Sans filtre, Volume : 2 litres, Type de sac : Sans sac

Besoin d'aide pour l'utilisation de votre PHILIPS FC 8422/01 City Line Sevilla ? Le groupe d'entraide PHILIPS FC 8422/01 City Line Sevilla vous donne des conseils d'utilisation, solutions aux problèmes d’entretien, fonctionnement et assistance pour votre Aspirateur. Rejoignez notre groupe d'entraide FC 8422/01 City Line Sevilla qui compte 32 membre(s). L'inscription GRATUITE vous donne accès à différents services pour votre Aspirateur : accès à la notice FC 8422/01 City Line Sevilla et mode d'emploi pdf PHILIPS FC 8422/01 City Line Sevilla, manuel d'utilisation en français, 13 avis consommateur et 4 discussion(s) de forum actif comprenant 6 participant(s), guide de l'utilisateur, photos, vidéos et SAV entre consommateurs.

Dernières actualités du groupe d'entraide PHILIPS FC 8422/01 City Line Sevilla

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • lucogre  depuis le 12/09/2016 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • laboriegribouille  depuis le 23/07/2016 - Expertise connaisseur - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 1 233 K | Français
Site Web Marque | Français

« se the appliance without the Motor Protection Filter.This could damage the motor and shorten the life of the appliance. ?If the mains cord of this appliance is damaged,it may only be replaced by Philips or a service centre authorised by Philips,as repair requires special tools and/or parts. Connecting accessories Hose 1To connect the hose to the appliance,push it into the appliance and turn it clockwise (fig.1). 2To disconnect the hose from the appliance,turn it anticlockwise and pull it out of the appliance. Tube Conical coupling (specific types only) 1To connect the tubes to the handgrip,insert the narrow section into the wider section while turning it clockwise.(fig.2) Use the same method to connect the accessories to the tube. 2To disconnect,turn the tube or the accessories anticlockwise and pull. Button coupling (specific types only) 1Connect the tube to the handgrip ("click").(fig.3) Use the same method to connect the accessories to the tube. 2To disconnect the tube from the handgrip,push the lock button and pull the tube out of the handgrip.(fig.4) The accessories can be disconnected in the same way. Telescopic tube (specific types only) 1Connect the tube to the handgrip. 2Adjust the tube to the length you find most comfortable during vacuum cleaning.(fig.5) Nozzle Convertible nozzle (specific types only) The convertible nozzle can be used on either carpets or hard floors. 1Connect the convertible nozzle to the tube. 2Push the rocker switch on top of the convertible nozzle with your foot to make the brush strip for cleaning hard floors come out of the nozzle housing (fig.6).7ENGLISH 3Push the rocker switch again to make the brush strip disappear into the convertible nozzle housing (fig.7). Reach & Clean nozzle (specific types only) ?The Reach & Clean nozzle can be used on either carpets or hard floors.The nozzle can be turned 360 degrees to 4 different positions,allowing you to also vacuum clean hard-to-reach places in an easy way.When the nozzle is positioned lengthwise,the suction power is concentrated at the front side of the nozzle (fig.8). ?To adjust the nozzle to the type of floor and the area to be cleaned,put your foot on the indicated spot and then turn the tube until the nozzle is in the required position (fig.9). 1With the nozzle positioned breadthwise and the brush strip folded out,you can clean large hard floor areas.Turn the tube until the brush strip pops out of the nozzle housing and the nozzle is positioned breadthwise (fig.10). 2With the nozzle positioned lengthwise and the brush strip folded out,you can vacuum clean small hard floor areas.Turn the tube 90 degrees anti-clockwise until it is positioned lengthwise with the brush strip still folded out of the nozzle housing (fig.11). 3With the nozzle positioned breadthwise and the brush strip folded in,you can vacuum clean large soft floor areas.Turn the tube 90 degrees anti-clockwise again to position the nozzle breadthwise and to make the brush strip disappear into the nozzle housing (fig.12). 4With the nozzle positioned lengthwise and the brush strip folded in,you can vacuum clean small soft floor areas.Turn the tube 90 degrees anti-clockwise again until it is positioned lengthwise with the brush strip still folded in (fig.13). Crevice tool,small nozzle and small brush (specific types only) 1Connect the crevice tool,small nozzle or small brush directly to the handgrip or to the tube. The crevice tool can be us... »

Activité de ce groupe d'entraide

Note moyenne du groupe
3 étoiles
Durée moyenne d’utilisation
6 ans
Avis consommateur
13 avis
Aucune opinion sur PHILIPS
Donner votre opinion sur PHILIPS
En cours...