Notice PHILIPS HQ7300

« with another plug, as this causes a hazardous situation. Do not use a damaged powerplug. If the powerplug is damaged, always have it replaced with one of the original type in order to avoid a hazard. Make sure the powerplug does not get wet. Store the appliance at a temperature between 5°C and 35°C. Always unplug the shaver before you clean it under the tap. - - - - - - - - - - ENGLISHThe appliance complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. This washable shaver is not suitable for shaving in the shower. Do not immerse the shaver in water. Water may leak from the socket at the bottom of the appliance when you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver. Electromagnetic ?elds (EMF) This Philips appliance complies with all standards regarding electromagnetic ?elds (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scienti?c evidence available today. Using the appliance Shaving 1 Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket. 3 Press the on/off button once to switch on the shaver. - - - - ENGLISH5The power-on lights go on to indicate that the motor is running. 4 Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 5 Press the on/off button once to switch off the shaver. The power-on lights go out. 6 Clean the shaver (see chapter ‘Cleaning and maintenance’). 7 Put the protection cap on the shaver every time you have used it, to prevent damage to the shaving heads. Trimming For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide downwards. The trimmer can be activated while the motor is running. 2 Close the trimmer (‘click’). Cleaning and maintenance Regular cleaning guarantees better shaving performance. - - ENGLISH6Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Note: Water may leak from the socket at the bottom of the appliance when you rinse it. This is normal and not dangerous. Every day: shaving unit and hair chamber 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the shaving unit. 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure you clean the inside as well as the outside of the shaving unit. 4 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 5 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. , ENGLISH7Every six months: shaving heads 1 Open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). 2 Clean the cutters and guards with the brush supplied. Do not clean more than one cu... »