Notice TRESEMME HP4882/07

« l description (fig.1) AAir inlet grille BTemperature slide switch - 6= Quick-Dry setting - 5= Caring setting - 4= Fixation setting CAirflow slide switch - O = off - I = low airflow especially intended for styling - II = strong airflow for quick drying DJetSET switch - Jet = position for extra-powerful airflow - 4= off - SET = position for fixation by means of cool airflow EIon slide switch - 0 = off - 1 = on FHanging loop GVolume diffuser (HP4883 only) HConcentrator IIon indicator light ENGLISH6Important Read these instructions for use carefully before using the appliance and save them for future reference. ?Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. ?Check the condition of the mains cord regularly.Do not use the appliance if the plug,the cord or the appliance itself is damaged. ?If the mains cord is damaged,it must be replaced by Philips,a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. ?Keep this appliance away from water! Do not use this product near or over water contained in baths,washbasins,sinks etc. When used in a bathroom,unplug the appliance after use since the proximity of water presents a risk,even when the hairdryer is switched off. ?For additional protection,we advise you to install a residual current device (RCD) with a rated residual operating current not exceeding 30mA in the electrical circuit supplying the bathroom.Ask your installer for advice. ?Keep the appliance out of the reach of children. ?Never block the air grilles. ?If the appliance overheats,it will switch off automatically.Unplug the appliance and let it cool down for a few minutes.Before you switch the appliance on again,check the grilles to make sure they are not blocked by fluff,hair,etc. ?Always switch the appliance off before putting it down,even if it is only for a moment. ?Always unplug the appliance after use. ?Do not wind the mains cord round the appliance. ?You may notice a characteristic odour when using this hairdryer. This is caused by the ions that are generated and it is not harmful to the human body. ?Do not probe the ion generator with metal objects. ENGLISH7Using the appliance Drying 1Put the plug in the wall socket. 2Switch the appliance on by selecting the desired airflow setting: -Set the slide switch to airflow setting II for ultra-quick drying. -Set the slide switch to airflow setting I for drying short hair or styling your hair. ?You can also use the Jet position of the JetSet switch for an extra- powerful airflow (fig.2). 3Set the temperature slide switch to the Quick-Dry,Caring or Fixation setting. The Quick-Dry setting 6 ?The Quick-Dry setting enables you to dry shower-wet hair very quickly (fig.3). It is recommended to use the Quick-Dry setting only on shower-wet hair and to select the Caring setting when the hair is almost dry in order to reduce the risk of overdrying. The Caring setting 5 ?The Caring setting gently dries the hair at a caring temperature (fig.4). The Fixation setting 4 ?The Fixation setting fixes the style you have created (fig.5). For long-lasting styling results,set the switch to the Fixation setting and direct the cool airflow at your hair to fix your style. ?You can also use the Set position of the JetSet switch to fix your style (fig.6). 4Switch the Ion function on or off by means of the Ion on/off s... »