Notice AXIS 214 PTZ

Notice AXIS 214 PTZ

Mode d'emploi AXIS 214 PTZ disponible.

Groupe d'entraide des utilisateurs AXIS 214 PTZ

Bienvenue dans le groupe d'entraide des utilisateurs
AXIS 214 PTZ

Le groupe d'entraide AXIS 214 PTZ vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Webcam. Rejoignez GRATUITEMENT notre groupe d'entraide 214 PTZ pour vous aider à mieux utiliser votre Webcam AXIS. Le SAV entre consommateurs donne accès à différents services pour votre AXIS 214 PTZ : accès à la notice 214 PTZ et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

AXIS 214 PTZ

Dernières actualités du groupe d'entraide AXIS 214 PTZ

Nouvelles questions du forum

Nouveaux membres

  • nogopet376  depuis le 14/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • snawpiscine  depuis le 17/05/2019 - Expertise débutant - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 915 K | Français

Pas de vidéo disponible

« mounting screws. Retaining wireSafety wire. Connector blockGreen 4-pin I/O terminal connector block. CDDocumentation and software. Printed MaterialsAXIS 214 Installation Guide, Axis Warranty Document. Junction box in ceiling Screw holes for direct attachment to ceiling Retaining wireCeiling bracket (A) Ceiling mounting If the AXIS 214 is to be mounted on a ceiling, it is recommended that you set the IP address and get the camera up and running before finally mounting it. The AXIS 214 PTZ Network Camera is supplied with 2 brackets for ceiling mounting. 1.Using appropriate screws (not supplied), attach the ceiling bracket (A) to a junc- tion box, as shown here. Use the screw slots for easy positioning. Attach the retaining wire if required. Alternatively, attach the bracket directly to the ceiling, using the 4 screw holes in the centre of the bracket. These screws are not supplied. Hole for cables Front of cameraPage 4 AXIS 214 Installation Guide 2.Attach the second bracket (B) to the base of the camera, using 3 of the supplied screws. The retaining wire should be attached to screw 3. 3.Tighten the screws a little at a time in the numbered order shown here, until all are securely fastened. 4.Insert the hooks on bracket (B) into the slots on bracket (A) and push bracket (B) back as far as it will go. Ceiling bracket (B) 5.Push up on the front of the camera and fasten it using the supplied screws, starting at the front. 6.Connect the power and network cables to the sockets on the rear panel. Ceiling bracket (A) Ceiling bracket (B) Retaining wireAXIS 214 Installation GuidePage 5 ENGLISH Setting the IP address The AXIS 214 is designed for use on an Ethernet network and must be assigned an IP address to make it accessible. AXIS IP Utility All installation methods This table shows all of the available methods for setting or discovering the IP address. Select a method from the left-hand column and check the requirements for it to the right. Notes: ?UPnP? and DHCP are both enabled by default in the AXIS 214. ?The AXIS 214 has the default IP address 192.168.0.90 ?To view the admin pages for the DHCP server, please see the server?s own documentation. You may need to contact your network administrator. ?If setting the IP address fails, check that there is no firewall blocking the operation. ?Bonjour - applies only to browsers that support it, e.g. Safari. Bonjour is a trademark of Apple Computer, Inc. AXIS IP Utility is the recommended method for setting an IP address in Windows. This free appli- cation can be used on networks with or without a DHCP server. See page6 for more information. DHCP Server in network Install on same network segment Internet connection with no HTTP proxy Operating system AXIS IP Utility (recommended method) See page6 OptionalRequiredWindows UPnP? See page6 OptionalRequiredWindows (ME or XP) Bonjour See page6 OptionalRequiredMac OSX (10.4 or later) AXIS Dynamic DNS Service See page8 RecommendedRequiredAll AXIS Camera Management See page8 OptionalRequiredWindows View DHCP server admin pages for IP address (See note below) RequiredAll Requirements methodsInstallationPage 6 AXIS 214 Installation Guide AXIS IP Utility AXIS IP Utility is a free Windows application that discovers and displays Axis devices on your network. The application can also be used to manu... »

En cours...