Notice THRUSTMASTER Ferrari GT Experience

« e pedal cable (8) to the wheel’s RJ45 connector (9). PLAYSTATION® 3 INSTALLATION ON PLAYSTATION® 3 1. Set the wheel’s USB selector (7) to the “PS3” position. 2. Connect the USB connector (12) to a USB port on your console. 3. Turn on your console. 4. Launch the game. You are now ready to play! USING THE “HOME” BUTTON (6) Your wheel’s “Home” button allows you to exit games and access your PlayStation®3 system’s menus. IMPORTANT NOTES ON PLAYSTATION® 3 - The wheel’s USB selector (7) must always be set to the “PS3” position before connecting your wheel. - In “1 Player” mode: If your official gamepad is turned on, you will have to switch it to “controller port 2” in order for your wheel to be functional. - On PlayStation® 3, the wheel is only compatible with PlayStation® 3 games (and will not function with PlayStation® 2 games). - On PlayStation® 3, vibration effects on the wheel are not supported (only on PC). - In certain racing games, do not hesitate to test out your wheel’s 2 sensitivity modes in order to optimize its precision and responsiveness. 4/10 PC Installation on PC The CD-ROM included with this product allows you to install the “Vibration Feedback” drivers. 1. Set the wheel’s USB selector (7) to the “PC” position. 2. Insert the installation CD-ROM into your CD-ROM drive. Follow the on-screen instructions to install the “Vibration Feedback” drivers. Once the installation is complete, click Finish and restart your computer. 3. Once your computer has restarted, connect the USB connector (12) to one of your computer’s USB ports. Windows® will automatically detect the new device. 4. Driver installation Drivers are installed automatically. Follow the on-screen instructions to complete the installation. 5. Click Start/Settings/Control Panel and then double-click Game Controllers (or Gaming Options, depending on your operating system). The Game Controllers dialog box displays the wheel’s name with OK status. 6. In the Control Panel, click Properties to configure your gamepad: x Test device: Allows you to test and visualize the buttons, D-pad and axes of the wheel and pedal set. x Test forces: Allows you to test 8 vibration effects and configure effect and vibration settings. You are now ready to play! IMPORTANT NOTES ON PC - The wheel’s USB selector (7) must always be set to the “PC” position before connecting your wheel. - Your wheel and pedals automatically self-calibrate upon connection of the USB connector. In the event of any problems, you can also carry out manual calibration by downloading the “Thrustmaster Calibration Tool” software, available at the following address: http://ts.thrustmaster.com 5/10 ADVANCED FUNCTIONS ADJUSTING THE WHEEL’S SENSITIVITY Your wheel’s steering has 2 sensitivity modes: - Normal sensitivity (the default mode) - High sensitivity (must be set) x Setting “High Sensitivity” mode: Action LED color Simultaneously press and release: the D-Pad (4) + the 2 UP and DOWN levers (1) FLASHES SLOWLY Your wheel’s steering is now more sensitive. (This procedure must be repeated each time you restart or disconnect your wheel) x Setting “Normal Sensitivity” mode (default mode): Action LED color Simultaneously press and release: the D-Pad (4) + the 2 UP and DOWN levers (1) DOES NOT FLASH Your wheel’s steering has now returned to nor... »