Notice LINKSYS WRT54GS

Notice LINKSYS WRT54GS

Mode d'emploi LINKSYS WRT54GS disponible.

Groupe d'entraide des utilisateurs LINKSYS WRT54GS

Bienvenue dans le groupe d'entraide des utilisateurs
LINKSYS WRT54GS

IEEE 802.11g - Routeur

Le groupe d'entraide LINKSYS WRT54GS vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Sans fil - WiFi. Rejoignez GRATUITEMENT notre groupe d'entraide WRT54GS pour vous aider à mieux utiliser votre Sans fil - WiFi LINKSYS. Le SAV entre consommateurs donne accès à différents services pour votre LINKSYS WRT54GS : accès à la notice WRT54GS et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

LINKSYS WRT54GS

Dernières actualités du groupe d'entraide LINKSYS WRT54GS

Nouvelles questions du forum

Lancez la discussion

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 14/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • ubcorp  depuis le 21/10/2018 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 17 238 K | Français

Pas de lien disponible

Pas de vidéo disponible

« Power port and the other end into an electrical outlet. If you were supplied a power adapter and separate power cord, connect the power cord to the power adapter, then connect the power adapter to the Router’s Power port. Plug the power cord into an electrical outlet. HPower on the PC you wish to use to configure the Router. Proceed to Step 2. D E 1Connect the Router There are two ways to configure the Router. Choose one of the following: •Run the Setup CD-ROM - It is strongly recommended that you use the Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and follow the on-screen instructions. •Use this Quick Installation guide - If you wish, you can use the Router’s Web- based Utility. Proceed to Step 1 of this Quick Installation. G IMPORTANT:Make sure you use the supplied power adapter. A different power adapter could damage the Router.3 2 AOpen your web browser. Enter http://192.168.1.1 in its Address field. Press the Enter key. BA password request screen will appear. Leave the User name field blank, and enter the default password, admin, in the Password field. (For added security, you should later set a new password, using the Administration tab’s Management screen of the Web-based Utility). Then click the OK button. CThe Web-based Utility will appear with the Setup tab selected. If requested by your Internet Service Provider (ISP), complete the Host Name and Domain Name fields. (These are usually requested by cable ISPs.) Otherwise, leave them blank. C Configure the Router NOTE: Make sure your PC’s Ethernet adapter is set to obtain an IP address automatically. For more information, refer to Windows Help. B4 DFor the Internet Connection Type setting, six connection types are offered through the drop-down menu, five of which are covered here. Each Setup screen and available features will differ depending on which connection type you select. Internet Configuration Type Automatic Configuration - DHCP: If you are connecting through DHCP or a dynamic IP address from your ISP, keep this default setting. Static IP: If your ISP assigns you a static IP address, select Static IP from the drop-down menu. Complete the Internet IP Address, Subnet Mask, Gateway, and Static DNS fields. You need to enter at least one DNS address. PPPoE: If you are connecting through PPPoE, select PPPoE from the drop-down menu. Complete the User Name and Password fields. Select Keep Alive if you always want to be connected to your ISP, or select Connect on Demand if you are charged for the time that you are connected to your ISP. PPTP: PPTP is a service used in Europe only. Complete the Internet IP Address, Subnet Mask, and Gateway fields. DHCP Static IP PPPoE5 Complete the User Name and Password fields. Select Keep Alive if you always want to be connected to your ISP, or select Connect on Demand if you are charged for the time that you are connected to your ISP. Telstra: Telstra is a service used in Australia and New Zealand only. If you are using an HBS connection, check with your ISP for setup information. L2TP: L2TP is a service used in Isreal only. If you are using an L2TP connection, check with your ISP for setup information. EWhen you have finished entering your Internet connection settings, click the Save Settings button to save your changes. FTo configure... »

Activité de ce groupe d'entraide

Note moyenne du groupe
4 étoiles
Durée moyenne d’utilisation
Avis consommateur
2 avis
Aucune discussion
Lancez la discussion !
Aucune opinion sur LINKSYS
Donner votre opinion sur LINKSYS
En cours...