Notice LINKSYS WRT54GL

Notice LINKSYS WRT54GL

Mode d'emploi LINKSYS WRT54GL disponible.

Groupe d'entraide des utilisateurs LINKSYS WRT54GL

Bienvenue dans le groupe d'entraide des utilisateurs
LINKSYS WRT54GL

IEEE 802.11g - Routeur

Le groupe d'entraide LINKSYS WRT54GL vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Sans fil - WiFi. Rejoignez GRATUITEMENT notre groupe d'entraide WRT54GL pour vous aider à mieux utiliser votre Sans fil - WiFi LINKSYS. Le SAV entre consommateurs donne accès à différents services pour votre LINKSYS WRT54GL : accès à la notice WRT54GL et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

LINKSYS WRT54GL

Dernières actualités du groupe d'entraide LINKSYS WRT54GL

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • jonedoo54  depuis le 27/11/2022 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • nogopet376  depuis le 14/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 2 377 K | Français

Pas de lien disponible

Pas de vidéo disponible

« There are two ways to configure the Router. Choose one of the following: •Run the Setup CD-ROM - Insert the Setup CD-ROM into the CD-ROM drive, and follow the on-screen instructions. •Use this Quick Installation guide - If you wish, you can use the Router’s Web-based Utility. Proceed to Step 1 of this Quick Installation. 3 FPower on the broadband modem. GConnect the AC power adapter to the Router’s Power port and the other end into an electrical outlet. HPower on the PC you wish to use to configure the Router. Proceed to Step 2. IMPORTANT:Make sure you use the power adapter that is supplied with the Router. Use of a different power adapter could damage the Router. G4 2 AOpen your web browser. Enter http://192.168.1.1 in its Address field. Press the Enter key. BA password request screen will appear. Leave the User name field blank, and enter the default password, admin, in the Password field. (For added security, you should later set a new password, using the Administration tab’s Management screen of the Web-based Utility). Then click the OK button. CThe Web-based Utility will appear with the Setup tab selected. If requested by your Internet Service Provider (ISP), complete the Host Name and Domain Name fields. (These are usually requested by cable ISPs.) Otherwise, leave them blank. C Configure the Router NOTE: Make sure your PC’s Ethernet adapter is set to obtain an IP address automatically. For more information, refer to Windows Help. B5 DFor the Internet Connection Type setting, six connection types are offered through the drop-down menu, five of which are covered here. Each Setup screen and available features will differ depending on which connection type you select. Internet Configuration Type Automatic Configuration - DHCP: If you are connecting through DHCP or a dynamic IP address from your ISP, keep this default setting. Static IP: If your ISP assigns you a static IP address, select Static IP from the drop-down menu. Complete the Internet IP Address, Subnet Mask, Gateway, and DNS fields. You need to enter at least one DNS address. PPPoE: If you are connecting through PPPoE, select PPPoE from the drop-down menu. Complete the User Name and Password fields. Select Keep Alive if you always want to be connected to your ISP, or select Connect on Demand if you are charged for the time that you are connected to your ISP. DHCP Static IP PPPoE6 PPTP: PPTP is a service used in Europe only. Complete the Internet IP Address, Subnet Mask, and Gateway fields. Complete the User Name and Password fields. Select Keep Alive if you always want to be connected to your ISP, or select Connect on Demand if you are charged for the time that you are connected to your ISP. Telstra Cable: Telstra is a service used in Australia and New Zealand only. If you are using an HBS connection, check with your ISP for setup information. L2TP: L2TP is a service used in Israel only. If you are using an L2TP connection, check with your ISP for setup information. EWhen you have finished entering your Internet connection settings, click the Save Settings button to save your changes. FTo configure the Router for your wireless network, select the Wireless Tab’s Basic Wireless Settings screen. PPTP Telstra Cable L2TP7 G GSelect the Wireless Network Mode: Mixed: If your... »

Activité de ce groupe d'entraide

Note moyenne du groupe
4 étoiles
Durée moyenne d’utilisation
Avis consommateur
39 avis
Aucune opinion sur LINKSYS
Donner votre opinion sur LINKSYS
En cours...