Les fils de discussion sont l’endroit où partager votre expérience avec les autres membres du groupe, leur poser vos questions, et répondre aux leurs.
Bonjour à Tous,
Les essuies glaces avants de mon Land Freelander 2 fonctionnent dans les modes "Normal " & "Rapide" mais plus dans le mode "Intermittent". De plus quand je les arrêtent (position du Arrêt sur le commodo), les essuies glaces s'arrêtent à leurs positions instantanées, c'est à dire n'importe mais plus jamais dans la position de repos normal en bas du pare brise.
Pourriez-vous me guider dans la recherche de la cause?
En vous remerciant d'avance pour vos réponses,
Yves
Réponse de danbail84, le 17/03/2018 à 10:26
je pense que le fin de course interne du moteur ne fait pas son role
Envoyer un merci ?Réponse de didji, le 17/03/2018 à 11:18
Bonjour, je crains que ce soit un problème du CBJ, module électronique soit défaillant soit à reprogrammer : voici l'explication en anglais
Envoyer un merci ?Windshield Wiper Slow Wipe
On receiving a request for slow windshield wiper operation the CJB will energize relay 11 in the BJB. When energized, relay
11 provides a feed to the switch contacts of relay 8, which is also located in the CJB. Relay 8 is the fast/slow wipe relay.
When slow wipe has been requested relay 8 remains de-energized, allowing a feed to flow across the relay switch contacts
to the windshield wiper motor slow speed brush contacts.
Windshield Wiper Fast Wipe
On receiving a request for fast windshield wiper operation the CJB will energize relay 11 and relay 8 in the BJB. When
energized, relay 11 provides a feed to the switch contacts of relay 8. The energized relay 8 provides a feed to the
windshield wiper motor fast speed brush contacts.
Windshield Wiper Intermittent Wipe
On receiving a request for intermittent windshield wiper operation, the CJB will energize relay 11 in the BJB to operate the
wipers at slow speed. Software contained within the CJB interprets the time delay requested and controls operation of
relay 11 accordingly.
The intermittent wiper setting broadcast on the LIN bus to the CJB equates to the following time delays.
Cordialement DIDJI