Notice AEG Airmax AAM6124

Notice AEG Airmax AAM6124 disponible gratuitement après inscription

Accédez à la notice du AEG Airmax AAM6124 en adhérant à la communauté.

Notice d’utilisation de votre AEG Airmax AAM6124. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre Airmax AAM6124.

Notices - manuels - modes d'emploi disponibles pour AEG Airmax AAM6124 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

zuiger nooit als het snoer beschadigd is. Schade aan de kabel van het apparaat valt niet onder de garantie. Accessoires Nederlands * Alleen bepaalde modellen.45121314 1617 18a 15 19a19b 18b Before starting 12 Open the front cover on the machine and check that the dust bag s-bag® and the motor ?lter are in place. (See also Replacement of ?lter) 13 Open the back lid on the machine and check that the exhaust ?lter* is in place. 3 Insert the hose into the hose handle until the catches click to engage (press the catches to release the hose). 14 Insert the hose until the catches click to engage (press the catches to release the hose). 15 Attach the extension tubes* or telescopic tube* to the hose handle and nozzle by pushing and twis- ting together. (Twist and pull apart to dismantle.) 16 Extend the electric cable and connect it to the mains. The vacuum cleaner is ?tted with a cable winder. Once the electric cable has been extended, it stays in that position. 17 To rewind the cable, press the cord rewinder pedal. The cable will then rewind. 18a Start the vacuum cleaner by rotating the power control in the direction of the “Max” position. Increase suction power by rotating the control further up to “Max” position. Stop the vacuum cleaner by rotating in the opposite direction to “Off” position. 18b* Suction power can also be adjusted by using the suction control on the hose handle. 19 Ideal parking position for pausing (19a) and (19b) storing, * Certain models only. EnglishFrançaisDeutschNederlands Avant de commencer 12 Ouvrir le couvercle avant de l'appareil et véri?er que le sac à poussière s-bagTM et le ?ltre moteur sont bien en place (voir aussi Remplacer le ?ltre). 13 Enlever la grille de sortie d'air e...

En cours...