Notice AEG DD9996B

Notice AEG DD9996B disponible gratuitement après inscription

Accédez à la notice du AEG DD9996B en adhérant à la communauté.

Notice d’utilisation de votre AEG DD9996B. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre DD9996B.

Notices - manuels - modes d'emploi disponibles pour AEG DD9996B après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

the time but this has no in?uence to the ?lter ef?ciency). • When ?tting the ?lters into the hood pay attention that they are mounted in correct position the handle facing outwards.11 EN Charcoal ?lter (recycling version) This ?lter cannot be washed or regenerated. It must be replaced when the C appears on the display or at least once every 4 months. The ?lter saturation alarm has to be activated already before. Activation of the alarm signal • In the recycling version hoods the ?lter saturation alarm must be activated during the instal-lation or later. • Switch off the hood and the lights. • Press the E-key for about 5 seconds until an animation appears on the display • Within 5 seconds press the D-key to activate/deactivate charcoal ?lter saturation alarm. • C-symbol lit - charcoal ?lter saturation alarm ACTIVATED. • C-symbol unlit - charcoal ?lter saturation alarm DEACTIVATED. REPLACING THE CHARCOAL FILTER Alarm reset • Press the G-key for at least 2 seconds. Replacing the ?lter • If close, open the upper panel (see Part USE). • Remove the metal ?lters. • Remove the saturated charcoal ?lter as indica- ted (A). • Fit the new ?lters as indicated (B). • Put the metal grease ?lters in their seats. Lighting LIGHT REPLACEMENT 20 W halogen light. • Extract the lamp from the lamp holder by pulling gently. • Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. AB12 EN Replacing the fuser The hood panel opening and closing mechanism is controlled by a starter motor which is activated by a fuser. This fuser works only on the starter motor. In case the fuser gets damaged when the panel is closed it is be necessary to manually unblock the panel....

En cours...