Notice AEG PS 305 DG

Notice AEG PS 305 DG disponible gratuitement après inscription

Accédez à la notice du AEG PS 305 DG en adhérant à la communauté.

Notice d’utilisation de votre AEG PS 305 DG. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre PS 305 DG.

Notices - manuels - modes d'emploi disponibles pour AEG PS 305 DG après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

e (6) to the desired miter setting and lock the miter lock lever. ¦Bevel lock lever/index pin to change the bevel setting of the blade (Fig. 6): -Pull the bevel lock lever forward. Then rotate the bevel index pin downward. This will allow the blade to be tilted and at the same time “by-pass” the preset bevel indexes. -To engage the preset bevel indexes, rotate the bevel lock index pin up. -Engage bevel lock lever before cutting. DESCRIPTION 1.Upper guard 2.Lower guard 3.Cover plate 4.Cover plate screw 5.Sliding fence 6.Table 7.Base 8.Mitre indicator 9.Bevel lock lever 10.Top carry handle 11.Slide tube(s) 12.Slide lock knob 13.Slide fence lock knob 14.Combination wrench 15.Mitre lock lever 16.The repeat-A-Cut 17.Depth adjustment clamp slide lock knob & Head hold down 18 Arbor lock pin 19.Lower guard safety lock knob 20.ON/OFF switch 21.Bevel index pin 22.Front carry handle 23.Workpiece clamp 24.Bevel indicator 25.Cord wrap brackets 26.Saw blade 27.Arbor screw (Left hand thread) 30.Blade flanges 31.Blade washer 32.Clamp support shaft 33.Quick release buttom 34.Mitre index wheel 35.Depth adjustment knob 36.Slide rail 37.Pivot assembly 38.Grub screw 39.Back fence 40.Bevel scale 41.Locking jam nuts 42.Hex lock nut 43.Mitre scale 44.Spacer 45.Roller 46.Torsion spring (inside) 47.Arm pivot shaft 48.Dust bag 49.Dust bag frame 50.Dust elbow STANDARD ACCESSORY 6.35 mm Hex “L” Combination wrench Workpiece clamp Dust Bag Owner’s manual Dust bag frame Dust elbow UNPACKING WARNING To reduce the risk of injury from unexpected starting or electrical shock, do not plug the power cord into a power source outlet during unpacking and assembly. This cord must remain unplugged whenever you are working on the saw. Thi...

En cours...