Notice AGFA AF 5109MS disponible gratuitement après inscription

Extrait de la notice

al data. Do not switch the device on immediately after transporting it.The device should not be switched on immediately after being moved from a cold to a warm room or vice versa or into a cold room which has been heated up quickly. In such cases, wait at least three hours until the device has adapted to the changed conditions (temperature, humidity…) . In the event that the device becomes too hot, or if you see smoke coming from the deviceIn the event that the device becomes too hot, or if you see smoke coming from the device, you must immediately pull the power cable out of the power socket. Have your device examined by trained pro- fessionals at a technical service location. To pre- vent the spread of fire, open flames should be kept away from the device. Do not plug in the device in moist rooms.Do not plug in the device in moist rooms. Never touch the mains cable or the mains connection with wet hands. Do not allow liquids to enter into the device.Do not allow liquids to enter into the device. Dis- connect the device from the power socket if liq- uids or foreign objects have entered the device and have your device examined by trained profes- sionals at a technical service location. Do not allow children to handle the device without supervision.Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children. Use only the enclosed power adapter Use only the enclosed power adapter (see chapter Appendix / Technical Data). Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location. This equipment complies with the voltage type specified on the unit. Never touch the power cable if the insulation is da...