Notice AGFA AP1100 disponible gratuitement après inscription

Extrait de la notice

AP1100 n-b.book Page 8 Jeudi, 21. septembre 2006 11:17 119 Incidents Note ! : The printer is fitted with an automatic time-out to prevent overheating, this can be tripped when performing large print jobs. The printer automatically restarts the current print job as soon as the temperature drops back to normal. Error indicators IndicatorCause Flashing redEnd of ribbon No more paper Paper jam Permanently redData reception error Consumable not compatible File format not supported PROBLEMSSOLUTIONS No mains supply •Check that the power supply is correctly plugged into the mains. •Check that the power supply connector is correctly plugged into the printer. •Check that the mains socket is working (check fuses and/or circuit breakers of your installation as necessary). The printer was unplugged during a print job •Check that the printer is off and then reconnect the mains lead. •Switch on the printer and wait for the initialisation phase to be completed, until the indicator associated to this function lights up green. •If a sheet of paper is jammed, carry out the procedure (refer to paragraph Paper jam, page8). •Printing will resume automatically. No photograph is printed on a sheet •Are you using sheets that meet the technical specifications (refer to paragraph Consumables, page7). •Have the sheets been inserted glossy face up? The photograph is marked with a continuous line or a lot of spots •Clean the printhead (refer to paragraph Cleaning the print head, page8). No printout from your personal computer or camera •Check that the cable is correctly connected (PC, camera...). •Is the printer driver installed? •Have you validated your consumable with the smartcard supplied? AP1100 n-b.book Page 9 Jeudi, 21. sept...