Notice ALPATEC BY TAURUS Alpaclim AC 7503 E

Notice ALPATEC BY TAURUS Alpaclim AC 7503 E disponible gratuitement après inscription

Accédez à la notice du ALPATEC BY TAURUS Alpaclim AC 7503 E en adhérant à la communauté.

Notice d’utilisation de votre ALPATEC BY TAURUS Alpaclim AC 7503 E. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre Alpaclim AC 7503 E.

Notices - manuels - modes d'emploi disponibles pour ALPATEC BY TAURUS Alpaclim AC 7503 E après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

l adapter A onto the wall by using 4 wall plugs and screws. 3. Attach the other end of the duct to the wall adapter A. 4. Cover the hole using the adapter cap when not in use. • The duct can be compressed or extended between 550mm and 2000mm, but it is desirable to keep the duct length to a minimum. IMPOR TANT: Do not over stretch or fold the duct (see picture). WATER TANK SAFETY FEATURE This unit is equipped with a fall-safe switch mechanism which prevents the unit from condensing water in the event the water tank is accidentally displaced, and / or FULL with water. If this situation occurs, the unit will signal 8 BEEPS and the WATER FULL indicator light will flash red continuously until the water tank is correctly positioned and / or emptied. NOTE : The fan motor will continue to operate under this condition. This is normal, but no cooling or dehumidifying will occur. 12 Wall adapter A INST INST ALLA ALLA TION TION 1• IMPORTANT : Installer le climatiseur sur une surface plane et dans un endroit spacieux, où les orifices de ventilation ne seront pas bouchés. Laisser un espace minimum de 30 cm entre le climatiseur et le mur ou tout autre objet. La prise de l’appareil doit toujours être accessible après son installation. 2• I NSTRUCTIONSDEMONTAGEDELAGAINE : A- Montage fenêtre (temporaire) : 1. Fixer la gaine à la sortie d’air du climatiseur. 2. Mettre la buse de sortie d’air B à l’autre bout de la gaine. 3. Positionner cette buse dans le cadre d’une fenêtre. B- Montage per manent : 1. Fixer la gaine à la sortie d’air du climatiseur. 2. Installer le manchon A dans l’orifice du mur préalablement percé, en utilisant les 4 chevilles et vis. 3. Fixer l’autre bout de la gaine à l’adaptateur A. 4. Couvrir l’adaptateur avec le cac...

En cours...