Notice ALPATEC BY TAURUS Rcmb 21 disponible gratuitement après inscription

Extrait de la notice

dicator « VENT. » 8. Low power light indicator « 1000 W » 9. High power light indicator « 2000 W » 10. Timer button « MIN. » 11. Timer power light indicator 12. Temperature display REMOTE CONTROL 13. - (temperature -) 14. + (temperature +) 15. Timer button 16. Function button 17. «» button 16 17 13 14 15 56789 101211 3 2 4 1 Notice RCMB 21:notice RC_20ET 11/06/12 16:00 Page 9STARTING Put 2 AAA batteries in the remote control. Plug the appliance. Room temperature is displayed on LED screen (12) and LED (6) is on. STARTING. Each time a fonction is on, the relative LED lights on. Press M/A (17) button, the appliance starts to fan. POWER SETTING. Press Fonction button (16) to select low power (1000W). Low power indicator (8) lights. Press again Fonction button (16) to select high power (2000W) High power indicator (9) lights. TEMPERATURE.(Only available with remote control) Press “+” and “-“ (14 or 13) button to set the desired temperature (from 10 to 49°C). The selected temperature flashes a few second on the LED screen, then the room temperature is displayed again. If the room temperature is higher than the selected temperature, the appliance fans only. If it is lower it will switch to low power (if gap is below 2°C) or high power (if gap is more than 2°C) TIMER. Use Min. (15) button to select the desired time (from 30 min to 7h30). Product will stop when the selected time is done. STOP. Press (17) button to switch off the heater. It will fan only for a while to cool down the product and then stop. SAFETY. This appliance is equipped with an automatic cut off when overheating. 10 Notice RCMB 21:notice RC_20ET 11/06/12 16:00 Page 10USING WITHOUT REMOTE CONTROL If your remote control doesn’t work (you don’t have any...