Notice ALTEC LANSING XA2021

Notice ALTEC LANSING XA2021 disponible gratuitement après inscription

Accédez à la notice du ALTEC LANSING XA2021 en adhérant à la communauté.

Notice d’utilisation de votre ALTEC LANSING XA2021. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre XA2021.

Notices - manuels - modes d'emploi disponibles pour ALTEC LANSING XA2021 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ers (per satellite):One 3" full-range driver Subwoofer: One 5.25" woofer POWER REQUIREMENTS USA, Canada and applicable Latin American countries:120 V AC @ 60 Hz Europe, United Kingdom, applicable Asian countries, Argentina, Chile and Uruguay:230 V AC @ 50 Hz ETL/cETL/CE/NOM Approved System Specifications* No LEDs are lit. No sound from one or more speakers. Crackling sound from speakers. Power isn’t turned on. Power cord isn’t connected to the wall outlet. Surge protector (if used) isn’t powered on. Wall outlet not functioning. Power isn’t turned on. Volume is set too low. RCA Cable isn’t connected to audio source. 3.5mm stereo cable isn’t connected to audio source or speaker system. 3.5mm stereo cable is connected to wrong output on audio source. Problem with audio source device. Bad connection. Volume level in computer operating system is set too high. A problem with your audio source device. Turn the VOLUME knob on the subwoofer until you hear a click sound. An LED will light on the subwoofer when the power is ON. Check to see if the “Power On” LED is illuminated on the subwoofer. If not, connect power. If the power cord is plugged into a surge protector, make sure the surge protector is switched on. Plug another device into the wall outlet (same jack) to verify the wall outlet is working. Verify the power cord is plugged into the wall outlet and the subwoofer. Turn the VOLUME knob on the subwoofer until you hear a click sound. An LED will light on the subwoofer when the power is ON. Turn the VOLUME knob clockwise to raise the volume. Check volume level on the computer sound card or alternate audio source device, and set at mid-level. Check plug connections on the audio source. Make sure the signal cables are inserted f...

En cours...