Notice ASROCK AM2NF4G-SATA2 disponible gratuitement après inscription

Extrait de la notice

d, please refer to Premium Discrete requirement at http://www.asrock.com99999 ASRock AM2NF4G-SATA2 Motherboard 2.2.2.2.2.InstallationInstallationInstallationInstallationInstallation Pre-installation PrecautionsPre-installation PrecautionsPre-installation PrecautionsPre-installation PrecautionsPre-installation Precautions Take note of the following precautions before you install mother- board components or change any motherboard settings. 1.Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the car- pet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3.Hold components by the edges and do not touch the ICs. 4.Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. 5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. 2.12.12.12.12.1CPU InstallationCPU InstallationCPU InstallationCPU InstallationCPU Installation Step 1.Unlock the socket by lifting the lever up to a 90° angle. Step 2.Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3.Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins. Step 4.When the CPU is in place, press it firmly on the socket while you...