Notice ASROCK G31M-S disponible gratuitement après inscription

Extrait de la notice

0MHz. Besides, if you want to overclock the CPU you adopt from FSB800 to FSB1066, you need to adjust the jumpers. If you adopt FSB1600-CPU, you also need to adjust the jumpers. Please refer to page 16 for proper jumper settings. 2.About the setting of “Hyper Threading Technology”, please check page 32 of “User Manual” in the support CD. 3.This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 21 for details. 4.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 13 for proper installation. 5.Please check the table below for the CPU FSB frequency and its corresponding memory support frequency. CPU FSB FrequencyMemory Support Frequency 1600DDR2 800 1333DDR2 667, DDR2 800 1066DDR2 667, DDR2 800 800DDR2 667, DDR2 800 6.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® XP and Windows® VistaTM. For Windows® XP 64-bit and Windows® VistaTM 64- bit with 64-bit CPU, there is no such limitation. 7.The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check Intel® website for the latest information. 8.Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 25 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly. 9.Power Management for USB 2.0 works fine under Microsoft® Windows® VistaTM 64-bit / VistaTM / XP 64-bit / XP SP1 or SP2 / 2000 SP4. WARNING Please realize that there is a certain risk...