Notice ASROCK K8SLI-eSATA2 disponible gratuitement après inscription

Extrait de la notice

ounded antstatic pad or in the bag that comes with the component. 5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. 2.12.12.12.12.1CPU InstallationCPU InstallationCPU InstallationCPU InstallationCPU Installation Step 1.Unlock the socket by lifting the lever up to a 90° angle. Step 2.Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3.Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins. Step 4.When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. Step 5.Install CPU fan and heatsink. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. EnglishEnglish EnglishEnglish English1010101010 ASRock K8SLI-eSATA2 Motherboard EnglishEnglish EnglishEnglish English 2.22.22.22.22.2Installation of Memory Modules (DIMM)Installation of Memory Modules (DIMM)Installation of Memory Modules (DIMM)Installation of Memory Modules (DIMM)Installation of Memory Modules (DIMM) K8SLI-eSATA2 motherboard provides two 184-pin DDR (Double Data Rate) DIMM slots. Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1.Unlock a DIMM slot by pressing the retaining clips outward. Step 2.Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It...