Notice BEKO TSE1230 disponible gratuitement après inscription

Extrait de la notice

f theappliance (Fig. 2 b).• The appliance should be located on a levelsurface. The two front feet can be adjusted asrequired. To ensure that your appliance isstanding upright adjust the two front feet byturning clockwise or counter-clockwise, untilthe product is in firm contact with the floor.Correct adjustment of feet avoids excessivevibration and noise. Installation (Under the counter) • Internal height of the counter should be820mm.(!) Cookers or other heat sources must not beplaced above the counter where the applianceis installed under the counter.• The mains wall socket plug must be closeto the right or left hand side of the appliance. • Remove the top cover of the appliance. Thereare 4 screws(2 pieces at the back, 2 piecesbelow the front edge) that should be removed.Fig. 7• Cut the part shown in the picture and thenremove it by the help of pliers.• Place you appliance under the counter andadjust the front feets until its top touches tothe counter.In order to use the product under the counter,the distance between the wall and thereference indicated in the top connection plasticmust be minimum 595 mm. Fig. 8-9• Fix the appliance under the counter by using2 of the screws that was removed from thetop cover.(Material of the counter must beplastics or wood based!) Fig. 10 2Get to know your appliance Warning Below information about accessories are supplied only for reference. Below accessories may not be exactly same as the accessories of your appliance. Prior to startup Before you start operating your appliance, thefollowing points should be re-checked forsafety: • Is the appliance, standing level on the floor?• Is there sufficient space for good aircirculation?• Is the interior clean? (Also see the section “Cleaning and care”)• Set the thermostat knob h...