l switch on again when the blockage has been remedied, 1 minute waiting time is allowed for and then the electricity supply will be restored again. Illustration 5 Cut off any wrapped around hair or threads using a pair of scissors. Illustration 6 Then vacuum up the threads and hair using the corner nozzle. Care Switch off the vacuum cleaner and pull out the mains plug before cleaning the Electromatic brush. The Electromatic brush can then be cleaned using a conventional plastics cleaner. ! Do not use any scouring agents, glass or all- purpose cleaners. Never immerse the Electromatic brush in water. Subject to technical change without notice. en Please keep these instructions. If the brush is passed on to a third party, ensure that the instructions are included. Field of application The Electromatic brush vacuums and brushes carpets when connected to the vacuum cleaner. It is particularly suitable for removing dust, fluff, threads and hair. It noticeably refreshes trodden down carpet pile. The Electromatic brush can also be used on hard flooring. Use as directed This Electromatic brush is intended for use in the home and not for industrial purposes. The Electromatic brush must be used exclusively in accordance with the specifications stated in these instructions. The manufacturer shall not be held liable for any damages which arise from a use which is not as directed or has been caused by an incorrect operation. Therefore, please ensure that the following information is observed and heeded at all times! Only use original spare parts. The Electromatic brush is not suitable for: vacuuming persons or animals vacuuming: -small creatures (e.g. flies, spiders, ...) -substances which can have advers...