Notice BOSCH PPC619B20E

Notice BOSCH PPC619B20E disponible gratuitement après inscription

Accédez à la notice du BOSCH PPC619B20E en adhérant à la communauté.

Notice d’utilisation de votre BOSCH PPC619B20E. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre PPC619B20E.

Notices - manuels - modes d'emploi disponibles pour BOSCH PPC619B20E après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

larly, do not drop hard or sharp objects onto the glass. Avoid Knocking any part of the edge of the cooking plate. Grains of sand, which may, for example, come from cleaning vegetables, can scratch the glass surface. Clean the surface of theheating elements oncethey have cooled down,each time they are used.Even small amounts of dirtburn when it is switchedon again. The burners and panssupport must be cleanedregulary to keep themclean. This is done bysubmerging them insoaply water andscrubbing them them witha non-metal brush to keepthe holes and slits freefrom obstruction so theycan give a perfect flame.Dry the burner coverswhenever wet or damp. After cleaning and dryingthe burners, make surethat the covers areproperly in position on theflame diffuser. Once the appliance iscold, clean it with asponge and soapywater. 10Troubleshooting ...if none of the electricalsystem works?-Faulty fuse.-Check the fuse in themain fuse box and -The automatic circuit breakeror mains differential has beentriggered. -Check to see if the circuitbreaker or a differential hasbeen triggered in the mains ...if the electric ignition systemdoes not work?-There may be food or cleaningproduct particles between thespark plugs and the burners. -The burners are wet.-Dry the burner covers andspark plugs carefully. -Check that the covershave been put in theproper position. -The covers on the burners arenot in the right position. ...if the flame on the burners isnot evenly distributed?-The burner components havenot been assembled properly. -The gas outlets on the burnersare dirty. -Put the components in theircorrect positions. -Clean the gas outlets on theburners. ...if the gas flow does not seemnormal or there is no gas flowat all? -The gas flow has been cut atan intermediate sto...

En cours...