Notice BRANDT AD1189X disponible gratuitement après inscription

Extrait de la notice

the hood, mount the non- return valve on the motor outlet -Secure the hood’s fi xing support, ensuring that it is perfectly level. (part A Pic. 1) — Fix the extendable evacuation sleeve (not included) to the motor outlet without impeding the movement of the non-return valve. — Fit and secure the body of the hood on this support with the screws provided for this purpose. Pict 2 Pict 1Pict 3 Pict 4 2 / INSTALLING YOUR APPLIANCEEN • ASSEMBLING THE VENTILATION SHAFT • Outdoor evacuation — Calculate the fi nal height for fi xing the duct support U-bracket (part B Pic. 1) — Mark the two holes accordingly — Drill 8 mm diameter holes and secure the duct support bracket, ensuring that it is fi xed on the same axis as the hood (part B Pic. 1) — Fix the fl at bracket behind the lower duct. (part C Pic. 4). — Place the glass on the guides. Slide the glass in and secure it with the 4 screws with rubber seal (glass safety). Tighten the screws slightly. — Fix the two ducts to the hood. — Connect the sleeve to the air outlet to the outside. — Make the electrical connection to the hood using the mains supply cable. — Lift the upper duct up to the ceiling and fi x it to the bracket using the screws. 10Pict 8 Pict 6 Pict 7 Pict 4Pict 3 2 / INSTALLING YOUR APPLIANCEEN • Recycling — Calculate the fi nal height for fi xing the duct support U-bracket (part B Pic. 1). — Mark the two holes. — Drill 8 mm diameter holes and secure the duct support bracket, ensuring that it is fi xed in the same axis as the hood (part B Pic. 1). — Fix the fl at bracket behind the lower duct part C Pic. 4). — Place the glass on the guides. Slide the glass in and secure it with the 4 screws. — Fit the sleeve adapter on the defl ector...