Notice BRANDT TE1017X disponible gratuitement après inscription

Extrait de la notice

(depending on the type of the tap - fig. 03) and turn it, observing the flame, to achieve such a size of the flame that will prevent it from being extinguished in a slight draught or during the operation of quick switching from the full to the simmering position . of the flame and back; the adjustment is correct when the core of the flame is cone-shaped in green and blue colour and is ca. 2 - 4mm tall, -if there are perceptible changes of gas pressure in the gas supply system, 1435 Y118085 X072 065Z097 X072Z097 085Y118 095T135 X072Z097 085 Y118 065 Z097 050 065 050 065 050 REPLACING THE NOZZLES Note: 1.Before replacing the nozzles and adjusting gas taps remove the cable plug from the mains supply . 2.When adjusting the taps do not unscrew the needle completely. The hob is adjusted to the type of gas and pressure stated on the appliance's rating plate. In the event of a change of the type of gas replace the nozzles and adjust the taps. Before beginning these activities you must: -shut down the cock shutting off the gas supply system or cylinder from the hob, -shut down all the taps in the hob, -disconnect the hob from the mains. Then: -remove the burners' lids and rings, -remove the nozzles with socket wrench no. 7 and replace them with new ones, -put burners' rings and lids back, -adjust the taps and check the con- nections for soundness. Fig 0134 085 065 050 095 Y118 Z097 X072 T135 3,0 3,0 1,75 1,75 1,0 11,0 3,63,6A B C D E 1633 A B B B C C C C A A E 3,0 1,0 1,75 E17 3,2 7,95 15,9 32 2,4 7,9518 49 31 Housing Seal19 30 Pan support grid Hob model: 4 gas burners2029212822 28 30 31 31 32 32 33 35 40 41 42 43 43 44 45 46 47 29 27232624 02 25 25...