Notice CALIBER MCD 370

Notice CALIBER MCD 370 disponible gratuitement après inscription

Accédez à la notice du CALIBER MCD 370 en adhérant à la communauté.

Notice d’utilisation de votre CALIBER MCD 370. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre MCD 370.

Notices - manuels - modes d'emploi disponibles pour CALIBER MCD 370 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

s and automatically playback the next track on the CD.The recorded track is automatically saved as a file into the folder “My CD” by the advance “File management” system of this unit. NOTE: -While recording,all the CD operations like Track up/down,Repeat,Random etc.can’t be used. -The audio will remain recording even MUTE function is activated. -Recording will automatically stop if the storage media is full. ENGLISH 4 RADIO OPERATIONS BAND SELECTION At tuner mode,press button (2) shortly to select the desired band.The reception band will change in the following order:FM1,FM2,FM3 and MW STATION SELECTION Press up or down button (20) shortly to activate automatic seek function.Press for 3 seconds until “ MANUAL” appeared on the display,the manual tuning Mode is selected.If the buttons are not touched for more then 3 seconds it automatic goes back to “AUTO SEEK” AUTOSTORE AS AUTOMATIC MEMORY STORING Press func button (10) “AS/PS” longer then three seconds ,activate AS.The radio searches for the 6 strongest stations and stores them into the preset of the currently selected band. NOTE:Any stations that were previously stored in this memory bank are replaced by a new station. PRESET SCAN PS Press func button (10) “AS/PS” for less then three seconds.The unit will pause for ten seconds at each preset station.Press button (10) “AS/PS” again to stop scanning when the desired station is reached. Station store and recall Press any one of the preset buttons (12 to 17) to recall a station which had been stored in the memory.Press a preset button for 2 seconds,previous preset station is overwritten by current tuned frequency. RDS (RADIO DATA SYSTEM) OPERATIONS The RDS data are the PI,PS,TP,PTY,TA and AF data. PI:Program indentification code Code for...

En cours...