Notice CANON Pixma MP520 disponible gratuitement après inscription

Extrait de la notice

tion Be sure to remove the tapes before you turn on the machine. Note Plug the power cord all the way in, since it may be difficult to plug.If an unintended language is displayed on the LCD, press the Back button to return to the Language selection screen. Caution Do not touch internal parts other than the Print Head Lock Lever. Important If you could not install the Print Head properly, lift the Print Head Lock Lever, remove it, and then install it again properly.Do not reattach the protective cap once it has been removed. Note There might be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. Important If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right side. Close and reopen the Scanning Unit (Printer Cover) to return the holder to the center.Make sure that all the ink tanks are installed in the correct position, matching the label. The machine cannot be used unless all the ink tanks are installed.When the “Perform head alignment if colors/lines are misaligned” message is displayed, then press the OK button. This message takes about two minutes until it is displayed. After pressing the OK button, the copy standby screen will be displayed.Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes and hands.Do not reattach the protective cap once you have removed it. Note Be sure to remove the clear film from the ink tank in the exact order as shown in step 3 of your setup sheet.An error message will be displayed on the LCD if an ink tank is not installed properly. Open th...