Notice CANON Pixma MP600 disponible gratuitement après inscription

Extrait de la notice

nternal parts other than the Print Head Lock Lever. Important If the Scanning Unit (Printer Cover) is open for more than 10 minutes, the Print Head Holder moves to the right side. In this case, close the Scanning Unit (Printer Cover), and open it again. Note There might be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items.Do not reattach the protective cap once it has been removed. Important Make sure that all the ink tanks are installed in the correct position, matching the label. The machine cannot be used unless all the ink tanks are installed.Wait for about 2 minutes, until the machine has stopped making operating noises, before proceeding. Note Be sure to remove the clear film from the ink tank in the exact order as shown in step 3 of your setup sheet.Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes and hands.Do not reattach the protective cap once you have removed it.An error message will be displayed on the LCD if an ink tank is not installed properly. Open the Scanning Unit (Printer Cover) and make sure that position of all the ink tanks match the label.5Preparing the Machine ENGLISH4Load printing paper. In the following process, you will be required to perform the Print Head Alignment, and you will need a sheet of A4 or Letter-sized plain paper loaded in the Auto Sheet Feeder. Important When loading paper in the Auto Sheet Feeder, make sure that the Auto Sheet Feeder lamp is lit.Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper to be jammed. Notes on the Print Head A...