Notice CANON PowerShot SX500 IS

Notice CANON PowerShot SX500 IS disponible gratuitement après inscription

Accédez à la notice du CANON PowerShot SX500 IS en adhérant à la communauté.

Notice d’utilisation de votre CANON PowerShot SX500 IS. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre PowerShot SX500 IS.

Notices - manuels - modes d'emploi disponibles pour CANON PowerShot SX500 IS après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

hat hard objects do not come into contact with the screen. • Do not attach any hard objects to the camera. Doing so may cause malfunctions or damage the screen. BNOX10 Initial Preparations Prepare for shooting as follows. Attaching the Strap 1 Attach the strap. zzAttach the included strap to the camera as shown. zzOn the other side of the camera, attach the strap the same way. 2 Attach the lens cap to the strap. zzRemove the lens cap from the camera and attach the lens cap cord to the strap. zzAlways remove the lens cap before turning the camera on. zzKeep the lens cap on the lens when the camera is not in use. Holding the Camera zzPlace the strap around your neck. zzWhen shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. If you have raised the ?ash, do not rest your ?ngers on it. BNOX11 Initial Preparations Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. 1 Remove the battery cover and insert the battery in the charger. zzRemove the cover from the battery, align the p marks on the battery and charger, and insert the battery by pushing it in () and down (). CB-2LY CB-2LYE 2 Charge the battery. zzCB-2LY: Flip out the plug () and plug the charger into a power outlet (). zzCB-2LYE: Plug the power cord into the charger, then plug the other end into a power outlet. XXThe charging lamp turns orange and charging begins. XXWhen the charging is ?nished, the lamp turns green. 3 Remove the battery. zzAfter unplugging the battery charger, remove the battery by pushing it in () and up (). • To protect the battery and keep it in optima...

En cours...