Notice CASIO 130CR disponible gratuitement après inscription

Extrait de la notice

ea. Default date format is Day/Month/Year. Default Monetary Mode is Add 2. Example: Change the date format to Month/ Day/Year, and change Monetary mode to Add 0. 1.Set the Mode Switch to PGM. 2.Press the following keys. P3 appears in mode display Program set code number Select numbers from lists A and B (To end the setting) Date Format Selections A Year/Month/Day? Month/Day/YearZ Day/Month/YearX Monetary Mode Selections B Add 0 (0.)? Add 1 (0.0)Z Add 2 (0.00)X ? Co ?ZXXo Z?p o Note:To prevent to lose all of your settings and sales data, we reccomend you to install the memory protection batteries. ?To load the memory protection batteries 1.Remove the printer cover. 2.Open the battery compartment cover. 3.Load 3 new UM-3, R6P (SUM-3) or LR6 (AM-3) type batteries into the compartment. Be sure that the plus (+) and minus (–) ends of each battery are facing in the directions indicated by the illustrations inside the battery compart- ment (Figure 1). 4.Slide the memory protection battery compartment cover back into place. 5.Replace the printer paper and printer cover. REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE EVERY YEAR.10 E Part-1QUICK START OPERATION 3.Loading Paper Roll And Replacing The Printer’s Ink Roll Mode Switch to REG OFF REG X Z RF PGM CAL &Press the l key to take up any slack in the paper. *Replace the printer cover by placing the cover’s front tab into the regis- ter’s groove. 2.To remove journal paper !Remove the printer cover following the instructions above. @Press the l key until approxi- mately 20cm of the paper is fed from the printer. #Cut off the roll paper. $Remove the take-up reel from the printer and take off the left plate of the reel. %Remove the journal paper from the take-...