city supply voltage is the same as that indicated on the appliance data plate. Only for UK: The appliance is supplied with a 3 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 3 amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code: Green and Yellow:Earth Blue:Neutral Brown:Live The wire coloured green and yellow must be connected to the terminal marked with the letter „E“ or by the earth symbol or coloured green and yellow. The wire coloured blue must be connected to the terminal „N“ or coloured black. The wire coloured brown must be connected to the terminal marked „L“ or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. ModelRC 1200 EGPRC 1600 EGP RC 1700 EGP TypeJCB - 1JCB - 1 Gross volume41 litre33 litre Mains operation220 - 240V (AC)220 - 240V (AC) Input85W75W Energy consumption1.38 kWh/24h1.35 kWh/24h Battery operation12V (DC)12V (DC)24V (DC) Input85W75W65W Energy consumption170Ah/24h150Ah/24h65Ah/24h Gas pressure (p)28-30/37 mbar28-30/37 mbar Gas classificationI3+I3+Jet size22 Rated thermal loading: butane 134W - 9,8 g/h134W - 9,8 g/h (propane)(118W - 8,4g/h)(118W - 8,4g/h) Min.thermal loading: butane 106W - 7,7g/h106W - 7,7g/h (propane) (86W - 6,1g/h)(86W - 6,1g/h) Climate classNN Refrigerant143g H2O + 67g NH3143g H2O + 67g NH3 8 GB10.2. Connecting to vehicle power source Make sure no other energy source is connected (gas, 230V). A safety fuse must be installed in the electricity supply between battery and the cooling box in a duct. 12V appliances must be connected...