Notice DORO HandleEasy 328gsm

Notice DORO HandleEasy 328gsm disponible gratuitement après inscription

Accédez à la notice du DORO HandleEasy 328gsm en adhérant à la communauté.

Notice d’utilisation de votre DORO HandleEasy 328gsm. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre HandleEasy 328gsm.

Notices - manuels - modes d'emploi disponibles pour DORO HandleEasy 328gsm après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

S 7 p q r s S s T U V 8 t u v Ü ü U u W X Y Z 9 w x y z Z z Z z * | / µ space 0 # S F ? O18 English Ring setup Selecting ring signal 1. Press w. The phone book numbers will be displayed. 2. Press w again. Stored SMS messages will be displayed. If no messages are stored, phone book numbers are displayed. 3. Press and hold w for 2 seconds. The ring signals will be displayed. 4. Scroll between ring signals with {/}. 5. Press w to select a signal. 6. Press L to end. Adjusting ring volume 1. In standby mode, press and hold } for 2 seconds. 2. Press }/{ to adjust the ring volume. Vibrator Press and hold # for 2 seconds to change the signalling mode: Ring only Vibrator only Ring and vibrator19 English Time/date Setting the time and date 1. Press w, the phone book numbers will be displayed. 2. Press w again, stored SMS messages will be shown. If no messages are stored, phone book numbers are still displayed. 3. Press and hold w for approx. 2 seconds, the ring signals will be displayed. 4. Press and hold w for approx. 2 seconds. 5. Press w to enter time (HH:MM). 6. Press w to save. 7. Scroll to date with }/{. 8. Press w and enter date (YYYY.MM.DD). 9. Press w to save. 10. Press L to end.20 English Care and Maintenance Your unit is a technically advanced product and should be treated with the greatest care. By following the advice below, you can ensure that the guarantee will cover any damage. • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. • Do not use or keep the unit in dusty, dirty e...

En cours...