Notice Danby DAC5209M disponible gratuitement après inscription

Extrait de la notice

Installed)Fig. 3 Slide down into tabs Shutter tabs Shutter Shutter frameFig. 4 Window sash “L” ShapedMountingBracket Shutter clamps 3/4” screws Fig. 5 Safety Lock 3/4” screw Foam Seal Fig. 6 PLEASENOTE:Window applications come in avariety of different styles. Therefore, it may be necessary to modify or improvise your particularinstallation. 7 OPERATINGINSTRUCTIONS SELECTORSWITCHThe selector switch controls fan speed and/or cooling speed. Toset desired cooling temperature, simply rotate the SELECTORknob to the appropriate setting. FANSPEEDS • LOWFANwill circulate air at minimum speed without cooling. • HIGHFANwill circulate air at maximum speed without cooling. COOLINGMODES • LOWCOOLprovides cooling with minimum air circulation. Recommended for night-time use. •HIGHCOOLprovides cooling with maximum air circulation. Recommended for quick cooling or for extremely hot days. Once room is cooled, reduce setting toLOWCOOL. • OFFshuts-down the unit completely NOTE:Always allow 3 minutes before switching from one mode to another. Thermostat Selector Switch THERMOSTAT The thermostat automatically controls the (compressor) cooling cycle and maintains the selected room temperature. To set the thermostat, rotate the thermostat knob to the desiredcooling setting (1 warmest - 7 coldest). The fan motor will continue to operate after the compressor (cooling) has cycled off. This is normal. When using FANcontrol, turn selector switch slowly, allowing unit to adjust. When usingTHERMOSTAT, be sure to allow three minutes before changing temperature. Adjusting tooquickly may cause compressor to overload. When cleaning the air conditioner, be sure to turn theSELECTORknob to the“OFF”positionand disconnect the power cord from the electrical outlet. 1)...