Notice Danby DPAC10010 disponible gratuitement après inscription

Extrait de la notice

lection willappear on the contol panel. Each depression of the fan key will advance to adifferent fan speed (High- Med.- Low) as shown in Fig. F. Otherwise, fanspeed is fixed to “low”. Note:THE WARM AIR EXCHANGE HOSES MUSTVENTINSIDE THEROOM WHEN USING DEHUMIDIFYMODE, NOTOUTSIDE AS ITDOESWHEN COOLING. FAN:NOTE:During Fan Mode, the exhaust hose does NOThave to be vented outdoors. 1)Press the POWERSWITCHkey pad to switch the unit on (Fig. A). 2)Press the MODE key (Fig.B) until the FANindicator illuminates on the control panel (Fig. C). Each press of the MODE key will advance to a differentmode setting (Cool-Dehumidifier-Fan). 3)Press the FANKey(Fig. E) to select the desired FANSPEED setting. Yourselection will appear on the control panel. Each press of the fan key willadvance to a differentfan speed (High- Med-Low) as shown in Fig. F. Fig. A Fig. B Fig. C Fig. E Fig. F OPERATION (cont’d) Fig. D1 Fig. D2 6 IMPORTANT:The drainhose must be installed duringdehumidifier mode. Drain Hose (79” / 200cm) Fig. GThe AUTO-TIMERfeature offers a unique selection of multiple choice, fully automaticon and/or off (start/stop)programs between 1-24 hours under any one mode of your HomeComfort unit. The programs are as follows:a)Auto-Off:Pre-select a time that will turn off theunit automatically (between 1-12hrs). b)Auto-On:Pre-select a time that will turn on theunit automatically (between 1-12hrs). c)Auto-On &Auto Off:Pre-select a time that will turn the unit ON / OFF automatically at specifiedtimes (between 1-12hrs). Note:These functions must be performed daily, asthe program is automatically canceled/erased after theprogram has ended. Control Buttons:1) Power Switch 2)Mode 3)Fan Speed 4)On / Off Timer 5)Time / Temperature Set• Used for adjusting the timer and...