The RS482-M motherboard supports UltraDMA bus mastering with transfer rates of 133/100/66/33 MB/s. The motherboard comes with the following expansion options: Expansion Options •One PCI Express x16 for Graphic Interface •Three 32-bit PCI v2.3 compliant slots •Two 40-pin IDE connectors supporting up to 4 IDE devices •One floppy disk drive interface •Four 7-pin SATA connector •Support 10/100 Mbps N-way Auto-negotiation operation •Supports Wake-On-LAN function and remote wake-up •Supports LED pins for various network activity indications •Supports Full Duplex Flow Control (IEEE 802.3x) •Integrated 10/100/1000 transceiver •Supports PCI rev. 2.3, 32-bit, 33/66MHz •Crossover Detection & Auto-Correction •Wake-on-LAN and remote wake-up support4 Introducing the Motherboard Motherboard Components5 Introducing the Motherboard Table of Motherboard Components This concludes Chapter 1. The next chapter explains how to install the motherboard. 1 CPU SocketSocket 939 for AMD K8 processor 2 CPU_FANCPU cooling fan connector 4 ATX_POWERStandard 24-pin ATX power connector LABEL COMPONENT 6 IDE1Primary IDE channel 3 DIMM1~2184-pin DDR SDRAM slots 8 SATA1~4Serial ATA connectors 10 CLR_CMOSClear CMOS jumper 5 FDDFloppy diskette drive connector 7 IDE2Secondary IDE channel 9 PWR_FANPower fan connector 11 PANEL1Front panel switch/LED header 15 BIOS_WPBIOS protection jumper 12 USB3-4Front Panel USB headers 13 1394A2*Onboard 1394a header 14 COM2*Onboard serial port header 24 SYS_FAN*System cooling fan connector 23 ATX12V4-pin +12V power connector 21 PCIEX16PCI Express x16 graphics card slot 17 CD_INAnalog audio input connector 16 AUDIO1Front panel audio header 19 SPDIFO1SPDIF out header 18 AUX_IN*Auxli...