Notice FISHER & PAYKEL E522BRXU disponible gratuitement après inscription

Extrait de la notice

he outlet of the water filter cartridge as shown in Diagram 2. Gently pull to ensure it is locked. 5 Measure the required length of tubing to run from the PRV to the water connection point. 6 Cut the tubing making sure the ends are square and clean. 7 Connect the tubing to the faucet connection and the base of the PRV (white collet) and then to the faucet as shown in Diagram 3. Please note that the faucet connection supplied should fit most installation situations. 8 Connect one locking key to each side of the water filter cartridge in between the cartridge and the locking collet as shown in Diagram 4. 9 To flush the water filter of any trapped air, harmless carbon fines and to also check for leaks, aim the end of the tubing into a bucket, turn isolating faucet on and run at least 10 qt (10 L) of water through. Once complete, turn isolating faucet off. 10 Locate desired position for water filter noting carefully the following points: ¦¦It is recommended to fit the water filter in a vertical orientation with the water filter head at the top. This will minimize water leakage when replacing cartridge. ¦¦Ensure the filter is in a convenient location to access every 6 months for replacement. We suggest that this location is beside the water filter supply faucet in a cupboard beside the refrigerator. ¦¦A minimum clearance of 2 ½” (64 mm) from the bottom of the filter cartridge is required to perform cartridge removal. ¦¦Do not screw water filter to refrigerator. Diagram 2 Fig.4 Waterline connection to refrigerator INLE T Diagram 4 Fig.6 Locking key Fig.3 PRV connection Diagram 1 Diagram 3 Fig.5 Faucet connection US CA 9Installation instructions 11 Attach double sided foam to the back of the water filter he...