Notice FISHER & PAYKEL RF201ADUX disponible gratuitement après inscription

Extrait de la notice

sh. Once the reservoir is full, this symbol will stop flashing. Diagram 5 Fig.7 Double sided foam attachment Fig.8 Waterline connection to refrigerator Diagram 6Diagram 8Diagram 9 Diagram 7Diagram 10 INSTRUCTIONS EN8Installation instructions 22 Run a further 3 qt (3 L) through the system, stopping intermittently to ensure the reservoir is flushed out. Failure to do this will result in excessive dripping from your dispenser. 23 Press until the Ice menu is highlighted then press to turn on the ice maker. Press together to force a cycle. The ice tray will flip. Force another cycle. The ice tray will flip and spill the water into the ice bin. Empty water and replace bin. 24 You are now ready to enjoy chilled water and ice dispensing from your Active Smart™ refrigerator. Please note that once installation is complete a few drips may appear out of the dispenser over the next few days as the remaining trapped air is cleared. Important! All connections must be checked for leaks. If unsure of connection process and/or leaks then contact your local plumber to install and check the system for you. Ensure white ¼” (6 mm) tubing is routed away from sharp objects, sharp corners (beware of kinking tube as this will stop water flow), clear of the refrigerator unit compartment and not in a location where it can be squashed. Ensure all push-fit connections are firmly pushed into place. The tube should push in ¾” (20 mm) before reaching the stop. If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to avoid leaks. To remove tube from connection points, turn off the isolating faucet, push in the collet and gently pull tubing at the same time, as shown in Diagram 11. System tested and certif...