Notice FUJITSU ASYA12LGC disponible gratuitement après inscription

Extrait de la notice

he FAN mode (the temperature will not appear on the Remote Controller’s Display). About three seconds later, the entire display will reappear. The thermostat setting should be considered a standard value, and may differ somewhat from the actual room temperature. To Set the Fan Speed Press the FAN button (Fig. 6 R). Each time the button is pressed, the fan speed changes in the following order: AUTOHIGHMEDLOWQUIET About three seconds later, the entire display will reappear. When set to AUTO: Heating :Fan operates so as to optimally circulate warmed air. However, the fan will operate at very low speed when the temperature of the air issued from the indoor unit is low. Cooling :As the room temperature approaches that of the thermostat setting, the fan speed becomes slower. Fan:The fan runs at the low fan speed. The fan will operate at a very low setting during Monitor operation and at the start of the Heating mode. SUPER QUIET Operation SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for quieter operation.
SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)
During Super Quiet operation, Heating and Cooling performance will be reduced somewhat. If the room does not warm up/ cool down when using SUPER QUIET Operation, please adjust the indoor unit’s Fan Speed. OPERATION ssss Example: When set to COOL. Example: When set to 26 °C. Example: When set to AUTO. s sss ttEn-6 To Stop Operation Press the START/STOP button (Fig. 6 S). The OPERATION Indicator Lamp (green) (Fig. 3 5) will go out. About AUTO CHANGEOVER Operation AUTO:
When AUTO CHANGEOVER operation first selected, the fan will oper- ate at very low speed for about one minute, during...