Notice HP DeskJet F2290

Notice HP DeskJet F2290 disponible gratuitement après inscription

Accédez à la notice du HP DeskJet F2290 en adhérant à la communauté.

Notice d’utilisation de votre HP DeskJet F2290. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre DeskJet F2290.

Notices - manuels - modes d'emploi disponibles pour HP DeskJet F2290 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

e computer using a USB cable before the HP Photosmart software is installed on the computer. If you connected the product to your computer before the software installation screen prompts you to do so, you must follow these steps: To troubleshoot software installation 1.Disconnect the USB cable from the computer. 2.Uninstall the software (if you have already installed it). For more information, see “Uninstall and reinstall the software” on page 7. 3.Restart your computer. 4.Turn off the product, wait one minute, then restart it. 5.Reinstall the HP Photosmart software. CAUTION:Do not connect the USB cable to the computer until prompted by the software installation screen. For support contact information, see the inside back cover of this guide. Uninstall and reinstall the software If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One. To uninstall from a Windows computer and then reinstall 1.Open the Windows control panel and double-click Add or Remove Programs. 2.Select HP Deskjet All-in-One Driver Software, and then click Change/Remove. Follow the onscreen instructions. 3.Disconnect the product from your computer. 4.Restart your computer. NOTE:It is important that you disconnect the product before restarting your computer. Do not connect the product to your computer until after you have reinstalled the software. 5.To reinstall the software, insert the product CD-ROM into your computer’s CD-R...

En cours...