Notice HP PhotoSmart D7260 disponible gratuitement après inscription

Extrait de la notice

etup program searches for the HP Photosmart on the network. 5.On the Printer Found screen, verify that the printer description is correct. If more than one printer is found on the network, the Printers Found screen appears. Select the HP Photosmart you want to connect. 6.Follow the prompts to install the software. When you have finished installing the software, the HP Photosmart is ready for use. 7.If you disabled any virus detection software on your computer, make sure to enable it again. 8.To test your network connection, go to your computer and print a self-test report to the HP Photosmart. Connect to additional computers on a network You can share the HP Photosmart on a network so that more computers can use it. If the HP Photosmart is already connected to a computer on the network, you must install the HP Photosmart software for each additional computer. During the installation, the software will discover the HP Photosmart on the network for each of the computers. Once you have set up the HP Photosmart on the network you will not need to configure it again when you add additional computers. Chapter 2 10HP Photosmart D7200 series EnglishChange the HP Photosmart from a USB connection to a network connection If you first install the HP Photosmart with a USB connection, you can later change to an Ethernet network connection. If you already understand how to connect to a network, you can use the general directions below. To change a USB connection to a wired (Ethernet) connection 1.Unplug the USB connection from the back of the HP Photosmart. 2.Connect an Ethernet cable from the Ethernet port on the back of the HP Photosmart to an available Ethernet port on the router or switch. 3.Install the software for a network connection, choose Add a D...