Notice Jenn-Air JEC0530ADB disponible gratuitement après inscription

Extrait de la notice

use. To lock controls: Press and hold the All-Off/Lock pad for three seconds. To unlock controls: Press and hold the All-Off/Lock pad for three seconds. The All-Off/Lock light will illuminate whenever the controls are locked. Cook and Warm Element The Cook and Warm Element, located in the left rear position, is a fully-functioning element that provides an Ultra Low/ Warm heat setting for holding delicate sauces and keeping cooked foods warm. To use the Warm setting, touch ON, and then touch Ultra Lo/Warm on the Temperature Selector Bar. To use the regular temperature settings, touch ON, and then touch any setting from LOW to HIGH on the Temperature Selector Bar. Note: When using the normal temperature settings to prepare foods, it will take a few minutes for the cooking area to cool to the Ultra Lo/Warm temperature setting. Triple Element (select models) The Triple Element, located in the center position, offers three different element sizes to accommodate different pan sizes. Use one, two or three sections of the element to best match your pan. To use the element: 1.Press ON. The inner-most element will activate. 2.Set the desired temperature on the Temperature Selector Bar. 3.Press ON again to activate the center and middle areas. 4.Press ON again to activate all three areas. Note: The Triple Element will remember the setting from the last time it was used. Therefore, one, two or all three areas may activate when ON is pressed. To change the areas activated, press ON again while the indicator light on the left is flashing. If the indicator light on the left is not flashing, press ON twice. Red lights on the control will indicate which areas of the element are activated. Custom Control Dual Element The Custom Control Dual Element...