Notice KENWOOD ES630

Notice KENWOOD ES630 disponible gratuitement après inscription

Accédez à la notice du KENWOOD ES630 en adhérant à la communauté.

Notice d’utilisation de votre KENWOOD ES630. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre ES630.

Notices - manuels - modes d'emploi disponibles pour KENWOOD ES630 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ufficiently to make espresso. 3Turn the steam/hot water knob clockwise to close. 4The unit is ready to make espresso. to boil water for other drinks, eg tea, fruit drinks. 1Turn the appliance on by pressing the on/off button (). 2Check that there is water in the tank. 3Position a container under the hot water/steam nozzle. 4When the OK light glows continuously, turn the steam/hot water knob in an anti-clockwise direction. Hot water will come out of the steam nozzle. 5To stop the flow of hot water turn the steam/hot water knob in a clockwise direction. Do not dispense hot water from the steam nozzle for longer than 20 seconds in one operation.auto switch off The machine will switch off after 1 hour if not used. To activate or deactivate the auto-off function press the and on/off () buttons at the same time for 5 seconds when on/off () button is in the off position. If the one cup indicator light () glows it indicates that the auto off function is activated, however if the two cup indicator light ()glows the auto off function is deactivated. To change the selection, press the button. To confirm the setting press the on/off button (). cleaning ?Before cleaning, unplug and let everything cool. ?Never immerse the appliance in water. ?Don’t wash parts in the dishwasher. tank, lid, filter holder ?Wash, rinse and allow to dry. filter (one and two cup version) ?Wash and dry after every use. ?After approximately every 100 uses dismantle and clean more thoroughly as described below. ?Remove the cap located on the underside of the filter by turning in the direction indicated . Remove the crema device by pushing up from the underside . Separate the components of the crema device by pulling the gasket to the side and removing the plastic disc and...

En cours...