Notice MSI 649 Neo-V

Notice MSI 649 Neo-V disponible gratuitement après inscription

Accédez à la notice du MSI 649 Neo-V en adhérant à la communauté.

Notice d’utilisation de votre MSI 649 Neo-V. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre 649 Neo-V.

Notices - manuels - modes d'emploi disponibles pour MSI 649 Neo-V après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

asten the cooler. Then rotate the locking switch (refer to the correct direction marked on it) to lock the hooks. 15. Turn over the mainboard to confirm that the clip-ends are correctly inserted. Note: If you want to uninstall the CPU, align the 4 points (see Point 8 for details) again and push the clip to lift up the CPU. MSI Reminds You... 1. Confirm if your CPU cooler is firmly installed before turning on your system. 2. Check the information in H/W Monitor in BIOS for the CPU temperature. 3. Do not touch the CPU socket pins to avoid damaging. 4. Whenever CPU is not installed, always protect your CPU socket pin with the plastic cap covered to avoid damaging. 5. Please note that the mating/unmating durability of the CPU is 20 cycles. Therefore we suggest you do not plug/unplug the CPU too often. 6 Memory The mainboard provides two 184-pin unbuffered DDR333 / DDR400 DDR SDRAM, and supports the memory size up to 2GB. To operate properly, at least one DIMM module must be installed. (For the updated supporting memory modules, please visit Install at least one DIMM module on the slots. Memory modules can be installed on the slots in any order. You can install either single- or double-sided modules to meet your own needs. Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the socket. 3. The plastic clip at each side of the DIMM slot will automatically close. Power Supply The mainboard supports ATX power su...

En cours...