Notice MSI K9NGM

Notice MSI K9NGM disponible gratuitement après inscription

Accédez à la notice du MSI K9NGM en adhérant à la communauté.

Notice d’utilisation de votre MSI K9NGM. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre K9NGM.

Notices - manuels - modes d'emploi disponibles pour MSI K9NGM après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

l the mainboard. Follow the steps below to use this guide: - Read the specifications of the mainboard first on page En-1. - Find out the component with the component number at your desire from the layout of the mainboard on page En-2. - Find out the component description and installing instructions with the “Components Index Table” direction and install it. - Set BIOS and install the driver / utiltity at your desire.En-4 MS-7252 Mainboard The mainboard supports AMD® processor. The mainboard uses a CPU socket called Socket AM2 for easy CPU installation. For the latest information about CPU, please visit pro_mbd_cpu_support.php 1 Central Processing Unit: CPU Overheating Overheating will seriously damage the CPU and system, always make sure the cooling fan can work properly to protect the CPU from overheating. Replacing the CPU While replacing the CPU, always turn off the ATX power supply or unplug the power supply’s power cord from grounded outlet first to ensure the safety of CPU. Important CPU Installation Procedures for Socket AM2 1.Please turn off the power and unplug the power cord before installing the CPU. 2.Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree angle. 3.Look for the gold arrow of the CPU. The gold arrow should point as shown in the picture. The CPU can only fit in the correct orientation. 4.If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard. 5.Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the leve...

En cours...