Notice NEC MultiSync LCD195NXM-BK disponible gratuitement après inscription

Extrait de la notice

s (Figure 4). 5. Place the power cable and audio cable into the speci? c hooks indi- cated in (Figure 6). 6. Place the D-Sub and the DVI-D cable and USB cable into the speci? c hooks indicated in (Figure 7). USB cable is used with NX models only. 7. Make sure all cables are resting ? at against the stand (Figure 7). 30° Tilt Highest Stand Position DVI Cable Input1(DVI) DC-OUT Input2(D-Sub) USB d Figure 4 Figure 6 USB (upstream) USB (downstream)5 Display Setup - continued Figure 9Figure 8 Figure 7 8. Hold the all cables ? rmly and place the cable cover onto the stand (Figure 8). To remove the cable cover, lift the cover off as shown in (Figure 9). 9. Connect the power cord to the power outlet (Figure 10). NOTE: If you have dif? culty removing the cable cover, please push the cover up (towards the top of the monitor) in order to unhook the cover from the stand, then remove, as shown in (Figure 11). Handle with care when removing cable cover. (NX models only)6 NOTE: If you use this monitor at AC125-240V, please refer to Recommended Use section of this manual for proper selection of power cord. 10. Turn on the monitor with the front power button and the computer. 11. Analog input only: No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further adjustments, use the following OSD® controls: • Auto Adjust Contrast • Auto Adjust Refer to the Controls section of this User ’s Manual for a full descrip- tion of these OSD controls. NOTE: For download information on the Windows® INF ? le for your monitor, refer to the References section of this User’s Manual. NOTE: If you have any problems, please refer to the Troubleshoot- Figure 10 Power B...