Notice NEC MultiSync LCD2090UXi-BK disponible gratuitement après inscription

Extrait de la notice

ini D-Sub to DVI-A cable into the hooks as indicated (Figure 7). 5. Cables should rest ?at against the stand. Figure A.1Figure A.2Figure B.1Macintosh Adapter (not included) 4 Make sure to leave enough slack in the cables so that the Tilt and the Raise and Lower functions of the monitor are not impeded. 6. Hold all of the cables ?rmly and place the cable cover onto the stand (Figure 8). 7. Slide the Cable Cover back into its correct position (Figure 9). Connect the power cord to power outlet. NOTE: Please refer to the Recommended Use section of this manual for proper selection of power cord. 8. The vacation switch on the left side of the monitor must be in the ON position for the monitor to function (Figure 10). Turn on the monitor using the front power button, then turn on the computer. NOTE: The Vacation Switch is a true on/off switch. If this switch is in the OFF position, the monitor cannot be turned on using the front button. DO NOT turn the vacation switch ON/OFF repeatedly. 9. For Analog input only: Upon initial setup, the No-Touch Auto Adjust feature automatically adjusts the monitor to the optimal settings that are needed for most signal timings. For further adjustments, refer to the Controls section of this User’s Manual for a full description of the OSM controls. For download information on the Windows® 95/98/Me/2000/XP INF ?le for your monitor, visit www.necdisplay.com/support. NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual. Highest Stand Position Power cord DC-OUT DVI-DDVI-I D-SUB 30TiltFigure 4Figure 5 Figure 6 Quick Start – continued (DC out for optional NEC products such as the Soundbar attachment. Do not use this...